 |
| Here is some of the old baseboard in my house. Sanding, a new shoe mould (the small piece of moulding that sits on the floor), a new coat of paint and it looks freshened up. The original copper grate also lends to the "old" look. |
Because this baseboard was left in a few spots, I tried to find a similar height to match. One thing I did stray away from was the curvaceous look of this baseboard, and instead went with a more streamlined, Mission style baseboard.
 |
| Simpler baseboard, with the same "beefy" height. Also notice the added details in the door frame; A plinth (the block on the bottom of the door frame) was added to be reminiscent of the era. One more coat of paint and filler and these baseboards and trim are done! Phew. |
This is something you notice in this house, but often, most people don't even notice these details in their own house. Typically, it's because a standard baseboard was used.
 |
| Check out the various sizes and their impact! via |
This is something to keep in mind when moving into a new home. If it's a builder home, see if they can upgrade the trims and baseboard. Or better yet, here is how you can fudge a tall baseboard, according to Chatelaine:
Start with a standard 6 1/2" baseboard. This one (first image above) is from Home Depot and costs less than $2 per linear foot. If you're going for a little height, add a 1 3/4" panel moulding (sometimes called chair rail moulding). This one (second image) is about $1.50 per foot. You've now got a 8 1/4" highly profiled baseboard.
Felling a little bolder? Try placing it an inch or so above the first baseboard, and painting the baseboard, section of wall and top moulding the same trim colour. You've now (third image) got a baseboard that's almost 10" tall.
